Developed idea- wood shop second project

On week 6, I continue my project, my next  3D design have difficult composition, but I would try. Part one I starting chose main stand. I need wood a width of about 10 cm, and about 5 cm thick, with the help of special machine, I cut off the wood and creating semicircle form. I was happy result, it will be more interesting in my project. 

Next my step was very difficult looking for the way to make the hole in the tree. I thought I could make this hole in the tree with a special machine, but the teacher told me it would be bad idea and the tree can be break in the process. so I try another way.

I first cut the tree itself, and then with the help of a special machine that makes rounded shapes, I cut the first part of the semicircle and then second ..

 My next step was to polish around 3-4 mill. of both side of excess material from inside of the circle and make the shape so that the tree would fit in the middle, and then I use the D3 wood Adhesive and glue them together. 

My next step is polish the wood, then buy the colour vanish and paint them. It will be my final step